Data East Star Wars – Outhole Drain Protector

It’s back to Cliffy’s, and this time it’s the outhole drain protector. The playfield is going to be up and down throughout the process, so it starts with removing the playfield glass and balls.

To install, unplug the lamp connector to the launch lamp. Remove the instruction and price cards, and unscrew the apron and remove.

Remove the 4 screws to loosen the trough (1/4″ hex heads) and the protector snaps into place

Then it’s reassembly. Screw in the trough, screw in the apron, plug in the launch lamp, and put back together and protected!

Cliffy’s Protectors at Passion for Pinball