During the recent cleaning, after removing the habitrail on the left of the playfield, I noticed one of the plastics was not straight. Worried the stress might cause the plastic to crack, I investigated.
You can’t really see it, but you could feel it (if you were here before I fixed it) this plastic is not straight
Removing the top plastic and lifting up the next layer, one screw is not all the way in, leaving a nut raised from the post, causing a push against the top plastic
Apparently it’s been like this for a while, as even the washer was bent (kinda hard to get a good picture of the washer)
Everything screwed into place and straight. Isn’t that much better? (Yes, it is much better)
