With the shooter eject protector installed, am I done with all of Cliffy’s protectors? No, there is another. I asked Cliffy if there was something…
Category: Pinball
Finally installing the final protector from the Cliffy’s set. This pair is for the shooter lane ball eject and go under the lane rails. While…
Pintastic New England was in Sturbridge, MA, and I was able attend Friday, 24-June. Thanks to everyone who was able to bring games to play,…
During the recent cleaning, after removing the habitrail on the left of the playfield, I noticed one of the plastics was not straight. Worried the…
Cleaning the playfield. Summary of the steps to clean and maintain the playfield, from the Pinside thread “Cleaning and Waxing Pinball Machines” started by vid1900…
Adding the headphone station to the PinSound board. Not intending to play with headphones much, but will use the external volume knob. The ability to…
Keeping the Cliffy train rolling, this weekend I put in the Force Scoop protector. This was a more simple process than installing the Salacc Pit…
Cliffy’s protectors for the switch slots where the ball drops from the habitrails. The left trails comes from the R2-D2 vertical kicker; the right trail…
It’s back to Cliffy’s, and this time it’s the outhole drain protector. The playfield is going to be up and down throughout the process, so…
Data East pinball machines are known to have a distinct hum, and my Star Wars is no exception. I replaced the original sound board with…